Page 1 of 1
Qubata Syquest
Posted: Wed Oct 18, 2017 6:47 pm
by klausfrank
Hello my fellow QL’ers
Anybody out there who had tried the Syquest with the QubATA? I have tried but the QubATA can’t or won’t recognize the drive. I would be very happy with some response.
Happy QLing
Klaus
Re: Qubata Syquest
Posted: Thu Oct 19, 2017 11:15 pm
by Nasta
There must be a cartridge inside the drive for the software to recognize it as a hard disc.
Re: Qubata Syquest
Posted: Fri Oct 20, 2017 8:18 pm
by klausfrank
Yes, you are right, but I have put in a cartridge formatted and by the QubIDE - it should work - but it will not!
Re: Qubata Syquest
Posted: Mon Oct 23, 2017 3:42 pm
by Silvester
Only works on Qubide v2 ROM/GAL ?
(My Iomega Zip 100mb drive required upgrade from v1.56 to V2.02 EPROM with new V2 GALs)
Re: Qubata Syquest
Posted: Tue Oct 24, 2017 12:43 pm
by Nasta
Yes, Syquest requires use of the alternate status register, hardware support was added in V2 GALs.
Re: Qubata Syquest
Posted: Tue Oct 24, 2017 4:24 pm
by Derek_Stewart
Nasta wrote:Yes, Syquest requires use of the alternate status register, hardware support was added in V2 GALs.
Hi Nasta,
Do you have the v2 GAL Code?