14th. italian meeting SINCLAIR QL

A place to discuss general QL issues.
User avatar
Giorgio Garabello
Trump Card
Posts: 159
Joined: Tue Jun 30, 2015 8:39 am
Location: Turin, ITaly
Contact:

14th. italian meeting SINCLAIR QL

Postby Giorgio Garabello » Mon Oct 16, 2017 9:55 pm

The 14th Sinclair QL Italian meeting will take place on Sunday 5 November 2017 at DTM Technologies premises in Modena.

We will start around 10:00 and the meeting will continue till 17:00 with a break of one hour for lunch in a tipical “tigelleria” in the nearby shopping center.

As for the last two Italian meetings (held in 2008 and 2014) we will organize educational sessions, we will have presentation of ongoing projects in Italy and we hope to organize teleconferences with overseas users.

It will also be possible to take part to the meeting by web-conference as in 2014. As there will be limited accesses, priority will be given to historical users and users who want to connect from abroad (at least for the sessions in English language).

Details on how to connect to the web-conference will be provided separately to the interested persons.
English sessions most likely will be planned in the afternoon also to allow people from US to attend.

How to reach

DTM is located in Northern Italy 2 Km far from “Modena Nord” A1 motorway exit. The offices are located inside the “Direzionale Tacito 51-65” building between the “Metro” and “Grandemilia” shopping centre. Closest airport is Bologna “Guglielmo Marconi” which can be reached in 40 minutes (45 Km). Verona airport is 102 Km far (1 hour). Milan and Florence can be reached in 1h 30 minutes by car or by train with very convenient connections. The “Mediopadana” high speed train station of Reggio Emilia designed by Santiago Calatrava is 25 Km far from DTM

How to reach by car

From the Motorway:

Take the exit Modena Nord on the A1 motorway (0 Km – toll gate). After 0,5 Km you will reach a roundabout (A). Remember to keep the left lane before reaching this roundabout. Take the exit for “Fiera” (270°) and you will pass over the A1 motorway. You will soon reach another roundabout (B – 1,3Km). Take second exit direction “Reggio Emilia – SS9”, you are now in Viale Virgilio. At the next roundabout (C – 1,7 Km)) take the 2nd exit following the direction “Reggio Emilia SS.9”. On your left you will find the “Metro” shopping mall. Just after the flags and the bus stop (2,0 Km) turn right in Via Omero. At the next cross-road turn right in Via Tacito (2,3 Km). DTM is located at the end of the street (2,5 Km) in the corner of the building on your left.

From Statale 9 Emilia.

You will find a traffic light (D) and if you arrive from Reggio Emilia on your left (or on your right if you arrive from Modena) you will see a very big sign showing the current exposition in Modena Fair. Turn there, after 200m just before the bus stop and the flags turn right into Via Omero. After 400m turn right in Via Tacito. DTM is located at the end of the street in the corner of the building on your left.

How to reach DTM by train

Stop at Modena railway station. Then take a TAXI or in alternative take Bus n.9 that stops in front of “Metro” shopping mall (then follows the instructions given above). You should ask for the stop “Viale Virgilio – Metro”. Please note that some of these buses does not stop in Viale Virgilio but proceed directly towards Rubiera. In that case you have to stop in Via Emilia beside the big “Grandemilia” shopping centre. Then you will have to walk for 5 minutes to reach DTM.

Stop at Reggio Emilia “Mediopadana” high speed railway station. Then take a TAXI to Modena which is located 25 Km far from the Mediopadana station. Or from the Mediopadana station get but/train to Reggio Emilia railway station and with the local trains you can reach Modena railway station


Information and logistical support

Davide Santachiara
ergon@libero.it
Cell. 328 9454484


ergonql
ROM Dongle
Posts: 17
Joined: Mon May 19, 2014 11:00 am
Contact:

Re: 14th. italian meeting SINCLAIR QL

Postby ergonql » Thu Oct 26, 2017 11:54 pm

Hi All,

Only as additional information an open web-ex conference is planned between 11:00 and 12:00 (Central European Time GMT+1 hour) but an additional session can also be planned in the afternoon if there will be interest. Details on how to connect to the web-ex conference will be provided separately to the interested persons.

Anybody who would like to give presentations of ongoing or new projects is very welcome, just contact me privately.

Thank you

Best regards

Davide


User avatar
vanpeebles
Commissario Pebbli
Posts: 1762
Joined: Sat Nov 20, 2010 7:13 pm
Location: North East UK

Re: 14th. italian meeting SINCLAIR QL

Postby vanpeebles » Mon Nov 06, 2017 8:19 am

How was the show? :)


User avatar
Cristian
Gold Card
Posts: 356
Joined: Mon Feb 16, 2015 1:40 pm

Re: 14th. italian meeting SINCLAIR QL

Postby Cristian » Mon Nov 06, 2017 9:23 pm

vanpeebles wrote:How was the show? :)

A terrific day 8-)


User avatar
Peter
Gold Card
Posts: 361
Joined: Sat Jan 22, 2011 8:47 am

Re: 14th. italian meeting SINCLAIR QL

Postby Peter » Mon Nov 06, 2017 10:05 pm

On the same day: Final release of the the Q68 FPGA version 1.0 :D


User avatar
vanpeebles
Commissario Pebbli
Posts: 1762
Joined: Sat Nov 20, 2010 7:13 pm
Location: North East UK

Re: 14th. italian meeting SINCLAIR QL

Postby vanpeebles » Mon Nov 06, 2017 10:07 pm

Cristian wrote:
vanpeebles wrote:How was the show? :)

A terrific day 8-)


Surely you can do a better show report than that! :lol:


User avatar
Giorgio Garabello
Trump Card
Posts: 159
Joined: Tue Jun 30, 2015 8:39 am
Location: Turin, ITaly
Contact:

Re: 14th. italian meeting SINCLAIR QL

Postby Giorgio Garabello » Tue Nov 07, 2017 7:26 am

vanpeebles wrote:
Cristian wrote:
vanpeebles wrote:How was the show? :)

A terrific day 8-)


Surely you can do a better show report than that! :lol:

A VERY terrific day 8-)


User avatar
vanpeebles
Commissario Pebbli
Posts: 1762
Joined: Sat Nov 20, 2010 7:13 pm
Location: North East UK

Re: 14th. italian meeting SINCLAIR QL

Postby vanpeebles » Tue Nov 07, 2017 7:55 am

Now where did I put that ban hammer?? :lol:


User avatar
dilwyn
Mr QL
Posts: 1231
Joined: Wed Dec 01, 2010 10:39 pm
Location: Wales
Contact:

Re: 14th. italian meeting SINCLAIR QL

Postby dilwyn » Tue Nov 07, 2017 8:54 am

vp_frustration.jpg
Vanpeebles reacts to Italian meeting report on QL Forum


Dilwyn
All things QL: see www.dilwyn.me.uk
User avatar
vanpeebles
Commissario Pebbli
Posts: 1762
Joined: Sat Nov 20, 2010 7:13 pm
Location: North East UK

Re: 14th. italian meeting SINCLAIR QL

Postby vanpeebles » Tue Nov 07, 2017 9:02 am

:lol:



Return to “General QL Chat”

Who is online

Users browsing this forum: No registered users and 3 guests