Page 2 of 2

Re: How to test if the drive or the cartridge is broken !

Posted: Thu Oct 05, 2017 9:29 pm
by RWAP
Just beware, there should be a small U shaped heatshield around the ULA on mdv1_ because it is too close to a capacitor on the main board..

mdv2_ also should have a small plastic washer around the back right screw to stop it from going through the QL case!

Re: How to test if the drive or the cartridge is broken !

Posted: Fri Oct 06, 2017 9:40 am
by Cristian
RWAP wrote:Just beware, there should be a small U shaped heatshield around the ULA on mdv1_ because it is too close to a capacitor on the main board..

mdv2_ also should have a small plastic washer around the back right screw to stop it from going through the QL case!

Thanks again. Also I fixed the mdv2_ issue: as you suggested, its flat connector (what a professional, reliable and robust one!) was not well plugged.