Just beware, there should be a small U shaped heatshield around the ULA on mdv1_ because it is too close to a capacitor on the main board..
mdv2_ also should have a small plastic washer around the back right screw to stop it from going through the QL case!
How to test if the drive or the cartridge is broken !
Re: How to test if the drive or the cartridge is broken !
Thanks again. Also I fixed the mdv2_ issue: as you suggested, its flat connector (what a professional, reliable and robust one!) was not well plugged.RWAP wrote:Just beware, there should be a small U shaped heatshield around the ULA on mdv1_ because it is too close to a capacitor on the main board..
mdv2_ also should have a small plastic washer around the back right screw to stop it from going through the QL case!